|Grinding systems can be used wherever it is essential that solid matter in fluids be broken down reliably to ensure the prevention of pipe clogging and damage to downstream equipment. The M-Ovas® and the Twin Shaft Macerator enable optimal and efficient grinding of solids in the most varied of applications.|
Grinding systems can be used wherever it is essential that solid matter in fluids be broken down reliably to ensure the prevention of pipe clogging and damage to downstream equipment.
The special design of the M-Ovas® housing carries the solids in the wastewater flow to the cutting plate, where they are held and chopped by rotating blades. This low-maintenance assembly is designed for sludge with a maximum flow of 300 m3/h and a dry matter content of up to 7%.
Twin Shaft Macerator
For applications with particularly large solid objects in the wastewater flow, the Twin Shaft Macerator is your ideal partner. Various tooth and spacer width plate combinations are available for different degrees of grinding. Depending on the application, five Twin Shaft Macerators are available in various designs, with flow rates from 1 m3/h to 270 m3/h at a dry matter content of up to 10%. The Twin Shaft Macerator is self-cleaning as the twin shafts rotate very slowly at slightly different speeds. Low driving power with a particularly high throughput guarantees efficient operation. The Twin Shaft Macerator ensures free flow and protects downstream pumping equipment and plant components.